Per Jamie Hansen, Philbrooks Boatyard, Ltd., this how to remove the companionway hatch:
To remove the fixed panel of the aft sliding hatch there are a few steps needed to take. There are several wood plugs on the top edge of the panel. After removing them, screws below can be removed. This may be enough to remove the panel. If not the hatch will need to be cut along the wood joint around the edge of the hatch frame. Once cut the top panel will be loose. To re-install use a brown caulking on the joint and screw the top back on the hatch frame. New teak plugs can then be glued in and sanded flush.
No comments:
Post a Comment